Nanjing Qianjin Sheet Metal Co., Ltd

Qianjin sheet metal company was found in 1989 and we have 2 factories and more than 110 people in each factory over 20 years development.

Home > News > Content
Cabinet Plate Requirements
- Jun 05, 2018 -

1. Cabinet panels: In the industry, the standard cabinet panels should be made of high-quality cold-rolled steel. Many cabinets on the market are not made of cold-rolled steel, but are replaced by hot plates or even iron plates. They are easily rusted and deformed. Please carefully identify!

Cold rolled steel plate. Cold-rolled steel plates are cold-rolled steel plates, commonly known as cold plates. Compared with hot-rolled steel, the thickness of the cold-rolled steel plate is more accurate, and the surface is smooth and beautiful. At the same time, it also has a variety of superior performance, especially the processing performance. High-quality cold-rolled steel plates ensure long-term toughness and load-bearing performance. Cold-rolled steel sheets are widely used in home appliances, industrial equipment, and various building materials such as automobiles, refrigerators, and washing machines. Cold plate surface: The surface of the cold rolled steel plate is smooth, beautiful, smooth and delicate, full of toughness and steel strength, highlighting the noble quality of the cabinet!

2, on the sheet thickness: the general requirements of the industry: the standard cabinet plate thickness column 2.0MM, side panels and front and rear doors 1.2MM (industry side of the requirements of the plate is more than 1.0MM, because the side plate can not afford weight, so the plate can be slightly Thinning to save energy, fixed tray 1.2MM. The columns of Huaan Zhenpu cabinet are all 2.0mm thick to ensure the weight of the cabinet (the main column is the main bearing).

Friendship Tip: The thickness of the board in the industry must meet the standard. If the thickness does not reach the standard, the cabinet will be deformed, affecting the service life and safety factor of the cabinet. The cabinet is mainly used to protect the equipment. Therefore, the safety performance is very important. Please be sure to ask for the thickness of the plate when buying it.